Services

Equipment, technical service and the room around it

Radiology Invest Group covers the full technical chain of a medical-imaging project: sourcing and trading equipment, servicing and spare parts, deinstallation and international logistics, installation coordination, MRI RF shielding and turnkey radiology development.

Service 01

Medical Equipment Trading and Sourcing

Radiology Invest Group supports hospitals, clinics, investors and equipment dealers in acquiring and selling medical-imaging systems. We can present equipment from current inventory or source systems according to specific technical, commercial and geographic requirements.

Buying decisions in this market fail for predictable reasons: an undocumented configuration, a software version that will not support the intended clinical work, a coil set that turns out to be incomplete, or a site that cannot physically accept the magnet. We work through those points before the commercial stage, not after.

Modalities we cover

  • MRI
  • CT
  • PET/CT and Nuclear Medicine
  • X-ray and Fluoroscopy
  • Ultrasound
  • Mammography
  • Injectors and accessories

What the scope typically includes

  • Requirement definition and configuration advice
  • Equipment identification through our international network
  • Used and refurbished MRI, CT and other imaging systems
  • Equipment evaluation and technical inspection coordination
  • Documentation of configuration, software version and system status
  • Commercial proposal with clearly defined responsibilities
Technical drawing of a wide-bore MRI system with patient table
Equipment sourcing and evaluation — illustrative
Buyer and seller side. We act for buyers looking for a specific system and for owners releasing equipment. In each case the scope, responsibilities and commercial terms are set out in writing before work begins.
Biomedical field engineers diagnosing an MRI system in a hospital technical room
Diagnostics and maintenance — illustrative
Service scope. Service availability depends on the equipment model, system condition and destination. Work may be delivered directly or in cooperation with qualified technical partners.

Service 02

Servicing and Maintenance

Keeping an imaging system available is a technical discipline, not a formality. We support clinics and imaging centres with scheduled maintenance and with the unscheduled problems that stop a scanner mid-list.

  • Preventive maintenance
  • Diagnostics
  • Troubleshooting
  • Repairs
  • Emergency technical support
  • Hardware support
  • Software support
  • System testing and calibration
  • Replacement-component installation
  • Service contracts for clinics and imaging centres
  • Remote assistance where technically possible
  • On-site assistance through qualified technical partners

We have experience across major medical-imaging platforms. Support is delivered directly and through qualified technical partners; we do not present ourselves as an authorized or manufacturer-certified service organisation.

Service 03

Spare Parts

Sourcing and supply of medical-imaging spare parts, from a single connector to a complete tube assembly. Send the part number and equipment model and we will search our supply network.

  • MRI coils
  • MRI electronic components
  • Computers, monitors and workstations
  • Gradient and RF components
  • CT tubes
  • CT detectors
  • Electronic boards
  • Cables and connectors
  • Patient-table components
  • Injectors and accessories
  • System-specific replacement parts

Part condition

Depending on availability and your requirement, parts may be supplied as:

New Refurbished Tested used

Condition, testing status and any warranty are stated in the written offer for each part. We do not publish blanket warranty periods.

Illustrative render of medical imaging spare parts: a CT X-ray tube housing, a surface coil cable and connector, a battery tray and an electronic board
Spare-part categories — illustrative
Faster identification. For faster identification, provide a clear photograph of the part label, the part number and the exact equipment model.
MRI scanner professionally rigged and protected for export in a specialist warehouse
Deinstallation, rigging and export packing — illustrative
Typical constraints we assess
Access routes, door and corridor dimensions, floor loading, lifting points, crane access, wall openings, quench-pipe removal and site working hours.

Service 04

Equipment Removal and Logistics

Moving an imaging system is a planning exercise before it is a lifting exercise. Every deinstallation begins with a site assessment, because the building usually decides the method.

  • Site assessment
  • Technical deinstallation
  • Equipment disconnection
  • Rigging
  • Equipment handling
  • Export packing
  • Labelling
  • Customs-documentation coordination
  • International transport
  • Delivery-site coordination
Documentation matters. Export and import documentation requirements vary by country and by equipment category. We coordinate the documentation set, but regulatory approval in the destination country remains subject to local requirements.

Service 05

Installation and Commissioning

Coordinated installation from delivery to handover, with qualified local technical partners engaged where their involvement is required.

  • Installation planning
  • Site coordination
  • Equipment positioning
  • Technical installation
  • Testing
  • Commissioning coordination
  • Qualified local-partner coordination
  • Handover support
No implied certification. Installation and commissioning are coordinated by Radiology Invest Group and carried out by qualified technical personnel. We do not represent this work as manufacturer-certified unless such authorization is explicitly confirmed in writing for the specific project.
Architectural floor plan of a radiology department with MRI examination room, technical room and control room
Site and room coordination — illustrative
Before delivery. Site readiness is checked against the installation drawings: room dimensions, structural openings, electrical supply, cooling, ventilation, shielding status and access route for the final positioning.
Technical drawing of an MRI RF shielding Faraday cage with copper panels, RF door, RF window and filter cabinet
RF cage component layout — illustrative
Sectional drawing of an MRI room wall build showing shielding layer, cladding, ceiling and floor construction
MRI-room wall section — illustrative

Service 06

MRI RF Shielding

Radio-frequency shielding is what separates a functioning MRI room from an expensive room with a magnet in it. We engineer, produce and deliver RF cages and the technical components of the MRI room around them.

  • RF cage engineering and production
  • Copper-layer shielding panels
  • RF doors and windows
  • Filter panels and cabinets
  • Interior wall cladding
  • Suspended ceilings and lighting
  • MRI-room flooring
  • Electrical and ventilation components
  • Site-specific production
  • Installation assistance
  • Production from architectural and technical drawings
Dedicated RF-shielding brand. A dedicated RF-shielding brand under the name The Cage may be introduced at a later stage. It does not exist as a separate company or website yet, and all RF-shielding work is currently contracted through Radiology Invest Group S.R.L.

Service 07

Turnkey Radiology Projects

For hospitals, investors and developers building or rebuilding an imaging department, we coordinate the equipment and the technical environment as a single scope, so responsibilities do not fall between suppliers.

  • Equipment selection
  • Room planning
  • Technical drawings
  • RF-shielding coordination
  • Radiation-shielding coordination
  • Electrical and mechanical infrastructure
  • Equipment delivery
  • Installation and commissioning
  • Training coordination
  • Service and spare-parts support

How a turnkey scope is structured

  1. Definition

    Clinical objectives, patient throughput expectations, modality mix and budget frame.

  2. Feasibility and planning

    Room planning, access routes, structural and infrastructure requirements, technical drawings.

  3. Equipment and shielding

    Equipment selection or sourcing, RF- and radiation-shielding coordination, component specification.

  4. Delivery and build

    Production, transport, room build, installation and commissioning coordination.

  5. Handover and support

    Training coordination, documentation handover, service and spare-parts support.

Next step

Tell us what equipment, spare part or technical support you need.

Send a short description of the system, the fault or the project. We will tell you what we can deliver directly and what we coordinate with qualified partners.